T-shirts · $8-$35
T-shirts: what to check
Fabric weight, collar recovery and print method, before you pick a size.
A t-shirt is the cheapest way to learn how a seller works, and the easiest item to get wrong. Two shirts with the same photo can differ in fabric weight, collar construction, side seams, and shrinkage. The listing usually gives a size chart and little else, so the questions you ask before paying decide what arrives. Start with the fabric: a lightweight jersey drapes and clings, a heavier one holds a boxy shape and hides the seams. Then check the collar, because a thin rib loses its shape after a few washes and makes the whole shirt look old. Print method matters too: a screen print sits on the fabric, a DTG print sinks into it, and a heat transfer can crack. None is automatically better. Match the method to the design and the number of washes you expect.
Buying criteria
- Fabric weight
- Ask for grams per square meter. Roughly 140 to 180 gsm reads light and clingy, 180 to 220 gsm is a standard tee, and above 220 gsm feels structured. The number varies by seller and is often approximate.
- Yarn and surface
- Combed cotton feels smoother and pills less than carded cotton. Ask whether the fabric is combed, ring-spun, or a blend, and what percentage of polyester is in it.
- Collar construction
- A ribbed collar with elastane recovers better than a plain cotton strip. Check the collar height and whether there is a taped neck seam, which reduces stretching.
- Side seams
- Tubular tees have no side seams and can twist after washing. Side-seamed tees keep their shape, especially in a boxy cut. Ask which construction the listing uses.
- Print method
- Screen print is durable and opaque, DTG is soft and detailed, heat transfer is cheap and cracks. Ask for the method and a close photo of the print edge.
- Shrinkage
- Cotton jersey can shrink after the first hot wash. Ask for a pre-shrunk or garment-dyed note, and compare the listed post-wash measurements if the seller provides them.
Measurements that decide fit
Measure a shirt you already wear flat, then compare chest, length and shoulder. Chinese charts run small, and oversized cuts are deliberately wide.
- Chest width (cm)
- Body length (cm)
- Shoulder width (cm)
- Sleeve length (cm)
| Measurement | How to take it | Tolerance |
|---|---|---|
| Chest width | Lay the shirt flat, measure armpit to armpit, then double it. | +/- 2 cm |
| Body length | From the highest shoulder point straight down to the hem. | +/- 1.5 cm |
| Shoulder width | Seam to seam across the back, flat. | +/- 1 cm |
| Sleeve length | From the shoulder seam to the sleeve hem, flat. | +/- 1 cm |
Sizing pitfalls
- Treating the tag size as US sizing.
- Measuring a stretched shirt.
- Ignoring shrinkage after a hot wash.
- Assuming an oversized cut is only one size up.
What the warehouse photo should show
- Collar shape and stitch density.
- Print alignment and edge sharpness.
- Side seams and hem stitching.
- Measurements against the chart.
- Stains, holes, or uneven dye.
Category notes are descriptive. They do not certify any seller, and they do not claim that a listing is a copy of a branded product. Verify the listing and the measurements yourself.