Jackets and outerwear · $28-$120
Jackets and outerwear: what to check
Shell, lining and seam work matter more than the photo of the model.
A jacket has more failure points than any other garment in a haul: the shell, the lining, the seams, the zipper, the insulation, and the hardware. The photo shows the shape; the specification decides whether it keeps rain out and holds together. Start with the shell fabric and the finish. A coated polyester can shed light rain; an uncoated cotton canvas absorbs it. Check whether the seams are taped, bound, or bare, and whether the pockets have flaps. Then look at the closures: a main zipper with a storm flap behaves differently from an open zip. On insulated jackets, ask for the fill type and the fill weight rather than trusting a temperature claim. The lining tells you how it feels and how it layers. A mesh lining is cool; a quilted taffeta slides over a sweater. Match the jacket to the weather you actually have, not to the product photo.
Buying criteria
- Shell fabric
- Ask for the material and the finish. Coated nylon or polyester resists light rain; untreated cotton absorbs it. Check the hand feel and the noise.
- Seam construction
- Taped seams resist water; bound seams are neater; bare overlock is cheap. Ask for a close photo of an inside shoulder seam.
- Insulation
- Synthetic fill stays warm when damp; down is warmer per gram but clumps. Ask for fill weight and type, not a temperature rating.
- Zipper and storm flap
- A metal main zip with a storm flap blocks wind and rain. Check the zip size, the pull, and whether the flap covers the teeth.
- Lining and pockets
- Mesh, taffeta, or fleece. Pocket bags should be reinforced at the corner. Ask for the number and type of pockets.
- Hood and hem
- Adjusters, a wired brim, and a drawcord hem change how the jacket performs. Check the hardware and whether the hood is removable.
Measurements that decide fit
Measure a jacket you layer under. Add 6 to 10 cm of chest ease over your base layer, and check the sleeve length against your arm.
- Chest width (cm)
- Body length (cm)
- Shoulder width (cm)
- Sleeve length (cm)
- Hip width (cm)
| Measurement | How to take it | Tolerance |
|---|---|---|
| Chest width | Flat, armpit to armpit, doubled, with the jacket zipped. | +/- 2 cm |
| Body length | From the collar seam at the back to the hem. | +/- 1.5 cm |
| Sleeve length | Shoulder seam to cuff, flat. | +/- 1 cm |
| Hip width | Flat across the hem, doubled. | +/- 2 cm |
Sizing pitfalls
- Buying for a temperature claim instead of a fill weight.
- Ignoring sleeve length on a boxy cut.
- Assuming a coated shell is waterproof at the seams.
- Forgetting that a puffer needs room to loft.
What the warehouse photo should show
- Seam tape and stitching.
- Zipper run and flap alignment.
- Fill distribution and cold spots.
- Hardware and drawcords.
- Measurements and weight.
Category notes are descriptive. They do not certify any seller, and they do not claim that a listing is a copy of a branded product. Verify the listing and the measurements yourself.